Deaerator Case Study: Weld Overlay on Deaerator
![Weld overlay on deaerator](https://deaerator.com/wp-content/uploads/2015/11/weld-overlay-on-tray-deaerator.jpg")
Problem:
Excessive pitting and/or erosion due to high velocity of steam and the deaerator will not perform properly.
Solution:
Overlay the tray deaerator section and/or replace the vessel shell.
Problem:
Excessive pitting and/or erosion due to high velocity of steam and the deaerator will not perform properly.
Solution:
Overlay the tray deaerator section and/or replace the vessel shell.